Molybdenum diboride (MoB2/MoB)

Molecular weight: 106.75

Density:9.20 g/cm3

Colour:gray

Melting point:2180°C

Formula:MoB2/MoB

CAS NO.：12006-98-3

EINECS (EC NO.)：234-492-5

send email

chat now

Share With:

Product Description Product Features Technical Specification Related Products

Product Description

Molybdenum boride (MoB2/MoB) has high hardness and low relative friction coefficient, chemical stability, wear resistance and corrosion resistance. This material is used on sliding friction surfaces to reduce wear. Molybdenum boride has a high melting point (2600℃), excellent wear resistance, heat resistance and oxidation resistance. It can be used for high temperature spray coatings, cermets, wear resistance coatings, high temperature resistances, crucible linings, filling spraying and Corrosion-resistant chemical equipment.

Product Features

1.High purity: the highest purity can reach 99.99%, XRD detect no impurity phase.

2.Concentrated distribution: standard normal particle size distribution, no bimodal or multimodal.

Technical Specification

Model	APS(D50)	Purity(%)	O(%)	N(%)	C(%)	B(%)
MoB20020	1.0-3.0um	>99.5	≤.0.5	≤0.05	≤0.10	27.2～29.8
MoB20001	-325mesh	>99.9	≤0.3	≤0.05	≤0.10	27.2～29.8
MoB 0020	1.0-3.0um	>99.5	≤.0.5	≤0.05	≤0.10	27.2～29.8
MoB 0001	-325mesh	>99.9	≤0.3	≤0.05	≤0.10	27.2～29.8
Customized chemical composition and particle size can be made according to customer requirements.

Element	Max	Typical	Element	Max	Typical	Element	Max	Typical
Al	0.0010	0.0005	Fe	0.0500	0.0300	P	0.0010	0.0005
As	0.0010	0.0005	K	0.0020	0.0010	Pb	0.0003	0.0001
Bi	0.0003	0.0001	Mg	0.0020	0.0010	S	0.0010	0.0005
Ca	0.0015	0.0006	Mn	0.0010	0.0005	Sb	0.0020	0.0010
Cd	0.0005	0.0001	V	0.0030	0.0015	Si	0.0050	0.0030
Co	0.0005	0.0001	Na	0.0020	0.0005	Sn	0.0003	0.0001
Ta	0.0050	0.0020	Ni	0.0050	0.0030	Ti	0.0050	0.0020
Cu	0.0003	0.0001	Nb	0.0030	0.0010	Cr	0.0050	0.0010

SEND MESSAGE